DDS CAR CARE PRODUCT USEAGE GUIDE FOR DISTRIBUTORS

 

VIBRANT CUT

COMPOUND

DDS.471 (32-1)

 

DESCRIPTION:

Vibrant cut compound is an aggressive abrasive cleaner designed to remove 800 to 1000 grit sand scratches. A quick cutting fast acting compound that will remove heavy paint imperfections.

KEY FEATURES:
  • Tan crème
  • Aggressive
  • Body shop safe

 

KEY BENEFITS:
  • Effectively cuts heavy paint imperfections.
  • Easy clean up
  • Contains no silicones body shop safe.

 

HOW TO USE:

Painted surfaces:

  1. Start with roof and proceed to hood, trunk and then sides.
  2. Apply a small amount of product to painted surface.
  3. While product is wet buff a 2x2 area with a high speed buffer at 1800 rpm or less. Make sure you are using a clean pad and keep buff pad flat on surface to reduce swirls. Use light to even pressure.
  4. Clean buff pad regularly with buff spur.
  5. Polish out and seal after compounding is completed.

Lightly dampen buff pad with water during use.

Fiberglass or gel coating:

  1. Test an inconspicuous area to assure dyes in product do not stain surface.
  2. Apply a small amount of product to surface.
  3. While product is wet buff a 2x2 area with a high speed buffer at 1800 rpm or less. Make sure you are using a clean pad and keep buff pad flat on surface to reduce swirls. Use light to even pressure.
  4. Clean buff pad regularly with buff spur.
  5. Polish out and seal after compounding is completed.

Lightly dampen buff pad with water during use. If product begins to dry or stick lightly mist water onto surface and continue buffing. Applying too much pressure can cause damage or burning to finish.

DDS assumes no liability for damage resulting from improper usage.

Consult the material safety data sheet (MSDS) for complete safety information.

 

 

DANNYS DEALER SUPPLIES 1037 OKEECHOBEE RD. WEST PALM BEACH FL. 33401 800-724-4386 OR 561-822-9994

WWW.DDSPRODUCTS.COM